Engine Maintenance

Engine Preventive Maintenance

We can’t stress enough the importance of preventative engine maintenance.

Engine Preventive Maintenance

Below is a list of engine systems and parts that require regular preventive maintenance:

Revolution-Sensitive Items

  • Water pumps
  • Alternators
  • Fuel transfer pumps
  • Oil pumps
Load-Sensitive Items

  • Cylinder liners
  • Cylinder heads
  • Connecting rods
  • Pistons
  • Piston rings
  • Main and connecting rod bearings
  • Valve train components
Environmental-Sensitive Items

  • Salt Water Open Systems
  • Air Filters
  • Rusty Parts
  • Deteriorated Hoses

Get In Tune With Your Engine

By being in tune with your engine, you can usually tell when you have a problem. The most important thing you can do is a complete visual inspection on a routine basis. You should also inspect the engines while running as you will spot problems that can only been seen at that time. To get the most out of your marine engine, it is important to follow the scheduled maintenance as outlined in your owner’s manual.

Basic Maintenance Schedule

The schedule will vary from manufacturer to manufacturer, but below is a very basic outline of what you can expect for a typical maintenance schedule.

  • DAILY:
    Check oil level in engine
    Check primary fuel filter
    Check cooling water level
    Check sea strainer
  • AFTER FIRST 50 HOURS:
    Change engine oil and filter
    Check V-belt tension
    Adjust valves
    Check electrolyte in batteries
  • EVERY 250 HOURS:
    Change engine oil and filter
    Check air cleaner
    Change primary fuel filter element
    Check electrolyte in batteries
    Check state of charge of batteries
  • EVERY 500 HOURS:
    Change engine oil filter
    Change primary fuel filter element
    Change secondary fuel filter
    Inspect condition of exhaust elbow
  • EVERY 1000 HOURS:
    Check air cleaner
    Check valve clearances
    Check injectors
    Check and flush cooling system
    Change impeller in raw water pump
  • EVERY 2400 HOURS:
    Check fuel injection pump
    Check and clean heat exchanger
    Descale raw water system

Related Maintenance Items

Maintenance schedules outlined by engine manufactures do not take related equipment into consideration, but for the engine to perform properly, other parts need to be maintained as well. These would include visual inspections of all hoses to and from the engine, seacocks and wiring — including terminal blocks and batteries. We can often spot problems that you may miss since we are attuned to those we tend to all the time. Ask for an engine room inspection when you bring your boat in for service or storage.

  • Exhaust Hose
  • Seacocks and Strainers
  • Fuel Systems
  • Fuel Tank Replacement
  • Engine Drive Train
  • Engine Alignment
  • Propeller Conditioning
  • Oil cooler maintenance
  • Engine Mount Replacement
  • Heat Exchanger Cleaning
Rusted Engine Mounting Tabs need service

Establishing a Baseline

If you have bought an older boat without adequate service records, it is best to perform any maintenance that should have been done up to that point to establish a baseline. It is better to err on the side of over-servicing than to let a crucial step be missed. From that point on you can establish your written records and dates of services performed. You should keep a log of everything related to maintenance and repair on your boat. Not only is it beneficial to you, when you sell your boat potential buyers can see the care you have taken.

I have put together the beginning of a log that you can alter according to your needs in an excel notebook. Feel free to download. The first page is basic information you should print out and keep on board for boatyards that are working on your boat.

Engine Symptoms

We have compiled a list of often seen problems and probable diagnosis. Without seeing the engine it is hard to accurately diagnose the problem but this is a good starting point. See the sympton list.